What about the PVC pipe production line?
You are here: home » News » Product News » What about the PVC pipe production line?

What about the PVC pipe production line?

Publish Time: 2022-11-14     Origin: Site

PVC pipe production line is important equipment for producing PVC pipe, which will be briefly introduced in this article.


Here is the content list

  • Features and uses of PVC pipe production line

  • How to properly maintain the PVC pipe production line to extend its service life?


Features and uses of PVC pipe production line

The production line is mainly used to produce plastic PVC pipes of various pipe diameters and wall thicknesses for agricultural water supply and drainage, building water supply and drainage, cable laying, and so on. The unit is composed of a conical twin-screw extruder, vacuum shaping machine, traction machine, cutting machine, turning frame, etc. The extruder and traction machine adopts an imported AC frequency conversion speed control device. The vacuum pump and traction machine are made of high-quality products. Traction has two claws, three claws, four claws, six claws, eight claws, ten claws, twelve claws, and other traction methods. Cutting can be done with saw blade type or planetary type, and it can also be equipped with length counting and thickness increasing device. The performance of the machine is reliable and the production efficiency is high.


How to properly maintain the PVC pipe production line to extend its service life?

  • PVC pipe production line must be installed, commissioned, or dismantled by personnel familiar with the machine in accordance with the prescribed protocols. The sharpness of the blades and die edges should be checked regularly, and if the edges are found to be blunt, they should be resharpened or replaced in time. Be sure to stop the machine when replacing the die to avoid danger.

  • PVC pipe production line factory store PVC pipe production line in the normal work, do not put your hand or part of your body between the upper and lower die, all debris and tools do not put on the workbench to avoid accidents. Since the PVC pipe production line can be operated by more than one person, a person must be in charge of directing the production.

  • When operating, you must be careful when holding the workpiece and waiting for the slider to go down. Be sure to choose the gap between the shear blade and punching die and the bending radius according to the thickness of the copper row.

  • Keep the oil clean and the oil circuit smooth, and add lubricant to the moving parts of each unit every shift. Electrical and hydraulic components must ensure that the action is flexible and correctly positioned, and must immediately stop and check when abnormalities are found.

  • To improve the service life of PVC pipe production lines, it is generally required to avoid direct sunlight and other thermal radiation, and to avoid places that are too humid, too dusty, or have corrosive gases. Corrosive gases tend to corrode and deteriorate electronic components, causing poor contact or short circuit between components and affecting the normal operation of the equipment. The precision PVC pipe production line should be kept away from equipment with high vibration, such as punching machines and forging equipment.

  • In order to avoid the impact of large power fluctuations and possible instantaneous interference signals, PVC pipe production line generally uses a dedicated power supply or additional voltage stabilization devices, etc., can reduce the impact of the quality of power supply and electrical interference.

  • The safety operation procedure is one of the important measures to ensure the safe operation of the PVC pipe production line, the operator must operate according to the operation procedure. When a failure occurs, the operator should pay attention to retaining the scene and truthfully explain to the maintenance personnel the situation before and after the failure to facilitate the analysis and diagnosis of the cause of the failure and timely elimination.

  • PVC pipe production line should not be sealed for a long time, after the purchase of PVC pipe production line should be fully utilized, especially in the first year of use, so that its weak links prone to failure are exposed as early as possible and can be removed during the warranty period. In the absence of processing tasks, PVC pipe production line should also be regularly energized, preferably 1-2 times a week, each empty run for about 1 hour, in order to use its own heat to reduce the humidity in the machine, so that the electronic components do not suffer from moisture, but also in time to find out if there is a battery alarm to prevent the loss of system software, parameters.


Chenxing company provides high quality and high-performance PVC pipe production line and provides professional pre-sales service to help you find the most suitable product for you. If you are interested in our products, welcome to contact us!


Related Articles

CONTACT US


J iangsu Province, China
No.188 Zhenbei Road, Leyu Town, Zhangjiagang City
  +86 15951187228
  ceo@cxsljx.com
 
KEEP UP TO DATE:
  • DISCOVER
  • INFORMATION
  • COSTOMER SERVICE
  • FOLLOW US
Copright 2024 Zhangjiagang Chenxing Machinery Co., Ltd.